Call us on: 01392 308110

Register, Test & Maintenance Records Refill - PAT Tester Accessories

Register, Test & Maintenance Records Refill


 

£5.50

(£6.60 inc tax)
In stock
+

A refill for the Equipment Register. Each pad has 60 sheets and includes the appliance register, test report sheets and maintenance and repair records.

No posts found

Technical Specification

Earth Continuity

Pass Limit

0.2 Ohms

Accuracy

+/- 0.03 Ohms

Test Current

200mA minimum

Test Voltage

9V nominal


Insulation Resistance

Pass Limit

1.0M Ohms CL I

2.0M Ohms CL II

2.0M Ohms Mains Cord

Accuracy

+/- 0.1M Ohms

Test Voltage

Test Current

>1mA into 500k Ohms

Test Current

<2mA into 2k Ohms

Cord Test

Earth continuity, insulation resistance as above. Check for Live and Neutral open circuit, short circuit or reversed polarity.

Environmental Rating

IP40
Operating Temperature Range 0°C to 40°, without moisture condensation.
Storage Temperature Range -25° to 65° Batteries should be removed prior to storage.
Overvoltage Category 300V CAT II

The 2-pin Schuko PAT Tester is for the European Market and provides the same safe, portable and reliable testing as the PB500. The tester works with European plugs, and the IEC lead supplied in the kit also complies with European requirements. 

Earth Continuity

Pass Limit

0.2 Ohms

Accuracy

+/- 0.03 Ohms

Test Current

200mA minimum

Test Voltage

9V nominal


Insulation Resistance

Pass Limit

1.0M Ohms CL I

2.0M Ohms CL II

2.0M Ohms Mains Cord

Accuracy

+/- 0.1M Ohms

Test Voltage

Test Current

>1mA into 500k Ohms

Test Current

<2mA into 2k Ohms

Cord Test

Earth continuity, insulation resistance as above. Check for Live and Neutral open circuit, short circuit or reversed polarity.

Environmental Rating

IP40
Operating Temperature Range 0°C to 40°, without moisture condensation.
Storage Temperature Range -25° to 65° Batteries should be removed prior to storage.
Overvoltage Category 300V CAT II 

You don't need to be an electrician to PAT Test. There is nothing to say that you have to attend a training course, the HSE (Health & Safety Executive) merely state that the testing must be carrried out by a competent person.

So how do you become competent? Well it boils down to having the necessary knowledge or skill to do something. For many people our instructional DVD is sufficient as it will take you through all steps of testing. If however, you are expecting your employees to carry out your company's PAT Testing, you may feel more confident knowing that you have sent them on a comprehensive course, that will ensure that they leave feeling confident and fully trained.

Our course includes:

  • Discounted PB500 (save 10% when buying the kit)
  • Free Course Materials
  • Free refreshments and lunch
  • Free Parking
  • Full PAT Tester Training
  • The visual inspection
  • Plug and fuse training
  • How to log and complete PAT Testing records
  • Test frequency and other legislative information
  • Plenty of hands on practical testing
After the course, our support continues. You can seak with one of our technicians between 9am and 5pm Monday to Friday to received free support and advice. Just call us on 01392 364933.   

   

The IET Code of Practice for In-service Inspections and Testing of Electrical Equipment (4th Edition) states that "The accuracy of a test instrument be verified annually or in accrodance with the manufacturer's instructions." 

"Such machine testing should be carried out by a formal calibration house, and the testing of the test leads should be assessed at the time of calibration."