Call us on: 01392 308110

You can buy the Clip

Earth Test lead CLIP ONLY P009PBCLIP


 

£7.50

(£9.00 inc tax)
P009PB CLIP
In stock
+
Purchase the Earth test lead CLIP Only.

Technical Specification

Earth Continuity

Pass Limit

0.2 Ohms

Accuracy

+/- 0.03 Ohms

Test Current

200mA minimum

Test Voltage

9V nominal


Insulation Resistance

Pass Limit

1.0M Ohms CL I

2.0M Ohms CL II

2.0M Ohms Mains Cord

Accuracy

+/- 0.1M Ohms

Test Voltage

Test Current

>1mA into 500k Ohms

Test Current

<2mA into 2k Ohms

Cord Test

Earth continuity, insulation resistance as above. Check for Live and Neutral open circuit, short circuit or reversed polarity.

Environmental Rating

IP40
Operating Temperature Range 0°C to 40°, without moisture condensation.
Storage Temperature Range -25° to 65° Batteries should be removed prior to storage.
Overvoltage Category 300V CAT II

The 2-pin Schuko PAT Tester is for the European Market and provides the same safe, portable and reliable testing as the PB500. The tester works with European plugs, and the IEC lead supplied in the kit also complies with European requirements. 

Earth Continuity

Pass Limit

0.2 Ohms

Accuracy

+/- 0.03 Ohms

Test Current

200mA minimum

Test Voltage

9V nominal


Insulation Resistance

Pass Limit

1.0M Ohms CL I

2.0M Ohms CL II

2.0M Ohms Mains Cord

Accuracy

+/- 0.1M Ohms

Test Voltage

Test Current

>1mA into 500k Ohms

Test Current

<2mA into 2k Ohms

Cord Test

Earth continuity, insulation resistance as above. Check for Live and Neutral open circuit, short circuit or reversed polarity.

Environmental Rating

IP40
Operating Temperature Range 0°C to 40°, without moisture condensation.
Storage Temperature Range -25° to 65° Batteries should be removed prior to storage.
Overvoltage Category 300V CAT II 

If you employ someone or members of the public visit or use your premises, you should be PAT Testing. You need to be able to demonstrate that your appliances have been inspected regularly. Ultimately it is the Owner/Directors responsibility whether they carry out the testing themselves or not. So even if a third party is employed to carry out the work - the Owner/Director will need to understand every aspect of PAT Testing to make sure the contractor is meeting the obligation fully. You can read more about Contractor v D.I.Y. PAT Testing by clicking here.       

You do not need to be an electrician or hold any qualification to carry out PAT Testing. You simply need to know what you are looking for. Our DVD is suitable for most people, but if you want the reassurance of attending a course, you can read more about attending a practical hands on course here

Determining the frequency of testing is one of the most important factors, when PAT Testing as the frequency is determined by the risk of the appliance, how and where it is used, who uses it as well as whether any other risk factors such as water are involved. This means that some appliances might need testing every six months, while others can be tested much less frequently.

Get to know your appliances and develop a frequency that suits you needs, you can do your own PAT Testing at a time that suits your business and using your own staff, giving you full control and minimising any disruption to your business, customers or residents.    

 

You don't need to be an electrician to PAT Test. There is nothing to say that you have to attend a training course, the HSE (Health & Safety Executive) merely state that the testing must be carrried out by a competent person.

So how do you become competent? Well it boils down to having the necessary knowledge or skill to do something. For many people our instructional DVD is sufficient as it will take you through all steps of testing. If however, you are expecting your employees to carry out your company's PAT Testing, you may feel more confident knowing that you have sent them on a comprehensive course, that will ensure that they leave feeling confident and fully trained.

Our course includes:

  • Discounted PB500 (save 10% when buying the kit)
  • Free Course Materials
  • Free refreshments and lunch
  • Free Parking
  • Full PAT Tester Training
  • The visual inspection
  • Plug and fuse training
  • How to log and complete PAT Testing records
  • Test frequency and other legislative information
  • Plenty of hands on practical testing
After the course, our support continues. You can seak with one of our technicians between 9am and 5pm Monday to Friday to received free support and advice. Just call us on 01392 364933.   

   

The IET Code of Practice for In-service Inspections and Testing of Electrical Equipment (4th Edition) states that "The accuracy of a test instrument be verified annually or in accrodance with the manufacturer's instructions." 

"Such machine testing should be carried out by a formal calibration house, and the testing of the test leads should be assessed at the time of calibration."