Call us on: 01392 308110

Technotrend Screwdriver - PAT Tester Accessories

Electronic Multi-Purpose Screwdriver P014



(£9.90 inc tax)
In stock

This handy electronic screwdriver will test cables, plugs and sockets without any dismantling or contact with live parts.

A useful accessory to help you carry out your Pat Testing, this screwdriver will also check for microwave leakage, no contact current detection, tracks cables, tests fuses and bulbs as well as many other uses.

Note: The Electronic Multi-purpose Screwdriver replaces the previous Quick Earth Finder and a useful tool for finding the earth point of any machine, prior to PAT Testing

No posts found

Earth Continuity

Pass Limit

0.2 Ohms


+/- 0.03 Ohms

Test Current

200mA minimum

Test Voltage

9V nominal

Insulation Resistance

Pass Limit

1.0M Ohms CL I

2.0M Ohms CL II

2.0M Ohms Mains Cord


+/- 0.1M Ohms

Test Voltage

Test Current

>1mA into 500k Ohms

Test Current

<2mA into 2k Ohms

Cord Test

Earth continuity, insulation resistance as above. Check for Live and Neutral open circuit, short circuit or reversed polarity.

Environmental Rating

Operating Temperature Range 0°C to 40°, without moisture condensation.
Storage Temperature Range -25° to 65° Batteries should be removed prior to storage.
Overvoltage Category 300V CAT II 

The IET Code of Practice for In-service Inspections and Testing of Electrical Equipment (4th Edition) states that "The accuracy of a test instrument be verified annually or in accrodance with the manufacturer's instructions." 

"Such machine testing should be carried out by a formal calibration house, and the testing of the test leads should be assessed at the time of calibration."